Inicio

Professional automotive pliers set. Indicated for use in the fuel circuit, coolant circuit and vacuum tubes. Each pliers has a non-slip rubberized handle to prevent them from slipping from your hand in case of contact with coolant. They have a ratchet locking system to avoid hand fatigue during removal or installation of the clamp.

Thanks to this base, a vehicle can be raised with an off-road jack in a more stable and safe way, especially on soft soils of sand, snow, grass or mud.

Supports a maximum load of 4 tons. Its external measurements are 30x30 cm and the space to attach the standard farm jack is 186x112 mm. It has a weight of 2 kg.

C-shaped claw type extractor for the installation and removal of upper and lower ball joints, and suspension arm silent blocks. Constructed of high-strength steel suitable for working with 4x4 off-road vehicles, pick-ups, trucks, vans and different models of vehicles with DANA 44 axles from Jeep, Ford, Dodge, IHC and GMC.

In addition to the installation and removal of ball joints, it allows the installation and removal of the suspension arm silent blocks that are placed under pressure without having to dismantle the arm, which will save you time and effort.

Handle guard flange for 4x4 offroad jack/high lift/farm jack. Eliminates noise and vibrations during transport by keeping the jack lever in a fixed and well-aligned position during transport and storage.

Accessory for offroad jack/farm jack/high lift jack/4x4 jack. It is used to attach to the rim and lift the vehicle from the wheel.

Set of 12-sided ¾ inch bihexagonal socket and ratchet wrenches presented in a metal case with carrying handle. 12-sided sockets that allow a better grip on 6-sided screws or nuts and also for torx type screw heads and for 12-sided bihexagonal screws.

Pair of McPherson suspension spring compressors made of high-strength chrome-vanadium and chrome-molybdenum steel. Universal, suitable for a wide variety of car, van, 4x4, pick-up or light truck models.

Guillotine type puller set for pulleys, gears or bearings. This extractor kit will allow you to remove a wide variety of diameters of pulleys, bearings, gears or pinions evenly without damaging or marking them. Made of high-strength chrome-vanadium and chrome-molybdenum steel.

Case of 5 pieces of suspension and steering ball joint separator extractors. Universal, valid for the vast majority of cars, vans or trucks. Tools made of high resistance steel presented in a plastic case.

Offroad jack/high lift jack/farm jack with a height of 20' (50 cm) with the capacity to lift up to 3 tons.

Ideal for rescue tasks in the 4x4 field, changing wheels, lifting vehicles, trailers, removing trees, removing window bars, mounting silent blocks, etc.

It is suitable even on soft surfaces (mud, snow, grass, sand) if used together with the base.

C-shaped claw type extractor for the installation and removal of upper and lower ball joints, and suspension arm silent blocks. Constructed of high-strength steel suitable for working with 4x4 off-road vehicles, pick-ups, trucks, vans and different models of vehicles with DANA 44 axles from Jeep, Ford, Dodge, IHC and GMC.

Accessory kit for 4x4 high lift farm jack consisting of:

• 4x4 high lift farm jack base for use on soft ground.
• 4x4 high lift farm jack wheel hitch.
• Handle guard flange for 4x4 high lift farm jack.