Inicio

Professional automotive pliers set. Indicated for use in the fuel circuit, coolant circuit and vacuum tubes. Each pliers has a non-slip rubberized handle to prevent them from slipping from your hand in case of contact with coolant. They have a ratchet locking system to avoid hand fatigue during removal or installation of the clamp.

Diámetro de rueda hasta 740 mm Cuenta con nivelador de burbuja para colocar la base perfectamente nivelada Incluye 4 rodamientos para hacer girar la rueda sobre el eje de equilibrado de forma suave y sencilla Color rojo ENVIO 24 HORAS laborables

C-shaped claw type extractor for the installation and removal of upper and lower ball joints, and suspension arm silent blocks. Constructed of high-strength steel suitable for working with 4x4 off-road vehicles, pick-ups, trucks, vans and different models of vehicles with DANA 44 axles from Jeep, Ford, Dodge, IHC and GMC.

In addition to the installation and removal of ball joints, it allows the installation and removal of the suspension arm silent blocks that are placed under pressure without having to dismantle the arm, which will save you time and effort.

Capacidad de 340 kg. o 750 lbs. INCLUYE 2 parejas de acoples. Una pareja tipo tenedor para levantar dede los diábolos y otra pareja plana engomada para elevar la moto desde abajo del basculante anchura regulable de 24 a35.5 cm. Color rojo Peso 6,2 kg.

Set of 12-sided ¾ inch bihexagonal socket and ratchet wrenches presented in a metal case with carrying handle. 12-sided sockets that allow a better grip on 6-sided screws or nuts and also for torx type screw heads and for 12-sided bihexagonal screws.

Pair of McPherson suspension spring compressors made of high-strength chrome-vanadium and chrome-molybdenum steel. Universal, suitable for a wide variety of car, van, 4x4, pick-up or light truck models.

Altura mínima 295 mm y altura máxima 395 mm. Superficie engomada antideslizande de 30 x 25 cm. Color rojooo Peso 8.5 kg.

Guillotine type puller set for pulleys, gears or bearings. This extractor kit will allow you to remove a wide variety of diameters of pulleys, bearings, gears or pinions evenly without damaging or marking them. Made of high-strength chrome-vanadium and chrome-molybdenum steel.

Reinforced 2-in-1 universal motorcycle stand.

It allows you to raise the front or rear axle of your motorcycle according to your convenience.

Case of 5 pieces of suspension and steering ball joint separator extractors. Universal, valid for the vast majority of cars, vans or trucks. Tools made of high resistance steel presented in a plastic case.

Professional motorcycle stand for front axle with 6 coupling diameters to hub or suspension fork stem and adjustable in height from 730 to 910 mm.

C-shaped claw type extractor for the installation and removal of upper and lower ball joints, and suspension arm silent blocks. Constructed of high-strength steel suitable for working with 4x4 off-road vehicles, pick-ups, trucks, vans and different models of vehicles with DANA 44 axles from Jeep, Ford, Dodge, IHC and GMC.