Inicio

Professional automotive pliers set. Indicated for use in the fuel circuit, coolant circuit and vacuum tubes. Each pliers has a non-slip rubberized handle to prevent them from slipping from your hand in case of contact with coolant. They have a ratchet locking system to avoid hand fatigue during removal or installation of the clamp.

Manual lever winch built in steel with high resistance cable with a maximum pulling capacity of 4 tons. Designed for rescuing stuck vehicles, quads, atvs, mounting boats on trailers, towing wagons...

C-shaped claw type extractor for the installation and removal of upper and lower ball joints, and suspension arm silent blocks. Constructed of high-strength steel suitable for working with 4x4 off-road vehicles, pick-ups, trucks, vans and different models of vehicles with DANA 44 axles from Jeep, Ford, Dodge, IHC and GMC.

In addition to the installation and removal of ball joints, it allows the installation and removal of the suspension arm silent blocks that are placed under pressure without having to dismantle the arm, which will save you time and effort.

Manual lever winch built in steel with high resistance cable with a maximum pulling capacity of 2 tons.

Designed for rescuing stuck vehicles, quads, atvs, mounting boats on trailers, dragging trolleys, dragging tasks in factories, construction, workshops, DIY...

Chain hoist/pulley set for professional industrial use with high load capacity.

Its maximum lifting capacity is 5 tons.

Working height range: 3 m.

It has two 360º rotating hooks.

Weight 35 kg.

Red color.

Set of 12-sided ¾ inch bihexagonal socket and ratchet wrenches presented in a metal case with carrying handle. 12-sided sockets that allow a better grip on 6-sided screws or nuts and also for torx type screw heads and for 12-sided bihexagonal screws.

Pair of McPherson suspension spring compressors made of high-strength chrome-vanadium and chrome-molybdenum steel. Universal, suitable for a wide variety of car, van, 4x4, pick-up or light truck models.

Guillotine type puller set for pulleys, gears or bearings. This extractor kit will allow you to remove a wide variety of diameters of pulleys, bearings, gears or pinions evenly without damaging or marking them. Made of high-strength chrome-vanadium and chrome-molybdenum steel.

Chair with padded seat for mechanical workshop with tool tray and 4 wheels for agile movement. Ideal for working comfortably in wheel arch areas, brake pad changes, bodywork...

CAPACITY for users up to 150 kg. Measurements 36.8*36*36.5cm 4 wheels of 5 cm. (2 inches) Red and black color.

Case of 5 pieces of suspension and steering ball joint separator extractors. Universal, valid for the vast majority of cars, vans or trucks. Tools made of high resistance steel presented in a plastic case.

C-shaped claw type extractor for the installation and removal of upper and lower ball joints, and suspension arm silent blocks. Constructed of high-strength steel suitable for working with 4x4 off-road vehicles, pick-ups, trucks, vans and different models of vehicles with DANA 44 axles from Jeep, Ford, Dodge, IHC and GMC.

Altura minima 295 mm. Altura maxima 430 mm. Peso de la pareja 5,6 kg. Color rojo